C-more micro EA1-S6MLW Uživatelský manuál stáhnout pdf

3505 HUTCHINSON ROAD

CUMMING, GA 30040-5860

Minimum items required to create a working system:

• C-more 6” Micro-Graphic panel

• C-more Micro-Graphic Programming Software EA-MG-PGMSW (Downloadable version available from the

AutomationDirect web site at no charge.)

• C-more Micro-Graphic USB to RS232 Programming Cable Assembly EA-MG-PGM-CBL, used to connect

between a PC and the Micro-Graphic panel’s built-in serial port. The panel will operate in Low-Power mode

when powered by the PC and the screen brightness is diminished.

• Power source – An external 12-24 VDC power source is required for normal High-Power operation.

Recommended power supplies are AutomationDirect part numbers PSC-24-015 or PSC-24-030.

• Personal computer – to run the C-more Micro-Graphic programming software

• Communications Cable (serial) – to connect the C-more Micro-Graphic panel to your controller

efore you begin...

Become Familiar with Available Communication Ports

Accessing the C-more Micro-Graphic Panel Setup Screens

Quick Start GuideQuick Start Guide

Quick Start GuideQuick Start GuideQuick Start Guide

Programming Software & Programming Cable (sold separately)

Agency Approvals

EA-MG-PGMSW

EA-MG-PGM-CBL

Additional Help and Support

Setup Menu

1. Information

1. Memory

2. Setting

1. LCD Contrast

2. Backlight

3. Beep

4. Calibration

5. Clear User Memory

. Serial Port1 – Loop Back Test

erial Port2 – Loop Back Tes

3. PLC Enquiry Test

o you want to exit from System Screen?

o[F1] / Yes[F5]

3. Test Menu

4. Exit

. Protocol

3. Extensions

4. Versions

6. Reset to Factory Default

. Hourglass

8. Rotation

4. Buzzer Test

5. Touch Panel Test

General Description

The C-more 6” Micro-Graphic panel has a 5.7-inch STN LCD monochrome 320 x 240 dot display. Model

EA1-S6ML has five selectable LED-driven backlight colors including Green, Red, Amber, Yellow and Lime.

Model EA1-S6MLW has five selectable LED-driven backlight colors including White, Pink1, Pink2, Pink3

and Red. Both models feature five user-defined function keys, each key with a user-defined red LED indi-

cator. The panels can display up to 40 lines by 80 characters of static text and up to 40 lines by 40 charac-

ters of dynamic text with embedded variables and phrases mixed with graphics at landscape orientation.

Portrait orientation can display 60 characters and 53 lines of static text and 40 lines by 40 characters of

dynamic text. Each model is rated UL for use on a flat surface of Type 1, 4X enclosure (indoor use only). The

C-more 6” Micro-Graphic panels are powered from a 12-24 VDC power supply or can operate in low-power

mode when powered from the serial communications port of select AutomationDirect PLCs.

Other features include:

• 1792 KB memory

• Built in RJ12 serial communications port (RS-232)

• Built in 15-pin serial communications port (RS-232/422/485)

• Adjustable contrast

• 2 optional keypad bezels, 20-button landscape and 21-button portrait mount

• Optional replaceable clear screen overlay

• Built in Alarm Control setup that activates beep, backlight flash, customized alarm banner, and red LED blinking

• Up to 999 screens, limited only by memory usage

• 0 to 50 °C (32 to 122 °F) operating temperature range

• UL, cUL & CE agency approvals (see below for details)

• 2-year warranty from date of purchase

Programming Software

USB to RS232 Programming

Cable Assembly

NOTE: Free download of the

CC--mmoorree

Micro-Graphic

programming software at the

AutomationDirect web site.

Safety Information

WARNING: To minimize the risk of potential safety problems, you should follow all applicable

local and national codes that regulate the installation and operation of your equipment. These

codes vary from area to area and it is your responsibility to determine which codes should be

followed, and to verify that the equipment, installation, and operation are in compliance with the

latest revision of these codes.

Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes

and standards. We do not guarantee the products described in this publication are suitable for your

particular application, nor do we assume any responsibility for your product design, installation, or

operation.

If you have any questions concerning the installation or operation of this equipment, or if you need

additional information, please call us at 1-800-633-0405 or 770-844-4200.

This publication is based on information available at the time it was printed. At

Automationdirect.com® we constantly strive to improve our products and services, so we reserve

the right to make changes to the products and/or publications at any time without notice and

without obligation. This publication may also discuss features that may not be available in certain

revisions of the product.

Connect C-more 6” Micro-Graphic Panel to PLC

Install the Software and Develop a Project

• For product support, specifications, and installation troubleshooting, a Hardware User Manual can be downloaded from

the On-line Documentation area of the AutomationDirect web site or purchased through the AutomationDirect Sales

team @ 1-800-633-0405 as part number EA1-MG6-USER-M.

• For software programming help, refer to the C-more Micro-Graphic Programming Software on-line embedded help.

• Refer to demos of the product at: www.CmoreMicro.com/software/software_demo.html

• For additional technical support and questions, call our Technical Support team @ 1-800-633-0405 or 770-844-4200.

Install C-more 6” Micro-Graphic Panel

NOTE: Recommended DC power supply to power the C-more Micro-Graphic Panel, AutomationDirect

Part No. PSC-24-015 or PSC-24-030.

o access the Setup Menu of the panel’s setup

screens, press the the BAK [F1] and ENT [F5]

function keys simultaneously for three (3) seconds.

From the Setup Menu, information about the panel

can be obtained, settings can be adjusted, and panel

functions can be tested.

enu flow Chart

Connect C-more Micro-Graphic Panel to Computer

Use an EA-MG-PGM-CBL, USB to RS-232 Programming Cable Assembly, from a USB port type A on the

project development PC, through the supplied converter, to the RJ12 RS-232 programming/PLC serial

communications port on the C-more Micro-Graphic panel as shown below.

C-more 6 inch

Micro Graphic

Panel

USB

Cable

User PC

erial

Cable

PC to Panel Programming

able Assembly

(Includes serial & USB cables)

EA-MG-PGM-CBL

USB to RS232

Converter

USB to RS-232

Programming Cable Assembly

C-more 6” Micro-Graphic Panels, Accessories & Replacement Parts

*NOTE:

CC--mmoorree

Micro-Graphic panels with the letter “W” in the part number designate units with

5 selectable background colors of White, Pink1, Pink2, Pink3 and Red. Part numbers without the

letter “W” are provided with 5 selectable background colors of Green, Red, Amber, Yellow and Lime.

NOTE: Software and Firmware Version 2.0 or later is required with models EA1-S6ML and

EA1-S6MLW. Available for free download at www.automationdirect.com.

EA1-S6MLW

shown in Portrait (Vertical) mode

EA1-S6ML

shown in Landscape (Horizontal) mode

Cutout

emplate

Function Key

Label Inserts

Mounting

Clips

C-more 6 Inch

Micro-Graphic

Panel

DC Power

onnector

Unpack and Inspect

• Unpack the C-more Micro-Graphic panel from its shipping

carton. Included in the carton are the following:

• C-more 6” Micro-Graphic panel

• cutout template

• mounting clips

• gasket

• function key label inserts

• Quick Start Guide

• DC Power Connector

• Unpack any accessories that have been ordered, such as:

Keypad Bezel, DC Power Supply, programming cable,

communications cable, etc.

• Inspect all equipment for completeness. If anything is missing

or damaged, immediately call the AutomationDirect returns

department @ 1-800-633-0405.

Install Optional Hardware Accessories (sold separately)

C-more 6 Inch

Micro-Graphic Panel

20 Button

Keypad Bezel

EA-MG6-BZ2

1. Remove

Expansion

Connector

Protective

Cover from

rear of

panel.

2. Use the (4) Panel Mounting

Clips that are supplied with

the panel, to secure panel to

keypad bezel and compress

the gasket between the

panel and the keypad bezel.

Tighten screws to a torque

of 21-28 oz-in [0.15-0.2 Nm].

3. Use (8) Bezel Mounting Clips to

secure keypad bezel through

enclosure cutout. Tighten screws

to a torque of 21-28 oz-in

[0.15-0.2 Nm].

Function

Key Label

Insert

4. Peel Protective Film

from front of panel.

Shown is an example of a

C-more 6” Micro-Graphic

panel being assembled with

an optional 20-button

Keypad Bezel.

NOTE: Mounting clips for the

panel or keypad bezel are

included with each product

LISTED LISTED

7M17 7M17

Date code:**** Date code:****

5 5

1 1

R01. R01.

MADE IN CHINA MADE IN CHINA

EA1-S6MLW + serial number EA1-S6MLW + serial number

MODEL:EA1-S6MLW MODEL:EA1-S6MLW

INPUT:12-24V 6.5W INPUT:12-24V 6.5W

IND.CONT.EQ. IND.CONT.EQ.

6 5 4 3 2 1

Pin Signal

1 Logic GND

not used

RXD (232C)

TXD (232C)

5 +5 VDC

6 Logic GND

8 1

Pin Signal

1 Frame GND

TXD (232C)

RXD (232C)

do not use

5 Logic GND

Pin Signal Pin Signal

6 LE

CTS (232C)

RTS (232C)

RXD+ (422/485)

10 RXD– (422/485)

11 TXD+ (422/485)

TXD– (422/485)

Term. Resistor

do not use

15 do not use

RS-232

RS-232/422/485

Expansion

Connector

RJ12 serial

communications Port1

PLC 15-pin serial

communications Port2

The C-more 6” Micro-Graphic panels include a built-in RJ12 serial communications port (RS-232) used to

communicate with a PC during project development and later as a PLC communications interface. There is

also a second 15-pin RS-232/RS-422/RS-485 port for communications to a PLC.

Panel Cutout (all models)

Landscape cutout shown

The C-more 6” Micro-Graphic panel can be

mounted through a cutout in an enclosure by using

the template provided with the panel, or using the

dimensions shown. The optional keypad bezels also

include templates. The enclosure mounting thickness

range for the panels and the keypad bezels is

0.04”–0.2” [1–5 mm]. Mounting screw torque is 21-

28 oz-in [0.15-0.2 Nm].

ENCLOSURE MOUNTING

THICKNESS RANGE

0.04” - 0.2” [1 - 5mm]

Enclosure Thickness

0.260

[

6.6]

.256

[

6.5]

.256

[

6.5]

.260

[

6.6]

R .118 [R3]

CUTOUT

UTOUT

UTLINE

EZEL

UTLINE

122.2

–0

0.04

–

0.00

.811

61.0

–0

0.04

–

0.00

6.339

Provide Power to the C-more 6” Micro-Graphic Panel

1). The panel should be powered by a 1 Amp @ 12-24 VDC

class 2 power source in normal operation.

2). The C-more 6” Micro-Graphic panel is powered during

programming from the PC through the USB to RS-232

Programming Cable Assembly, EA-MG-PGM-CBL. When

powered from the PC, the panel will operate in Low-Power

mode.

3). Optionally, the C-more 6” Micro-Graphic panel can be

powered in Low-Power mode* from most AutomationDirect

PLC’s RJ12 serial communications port by using a

DV-1000CBL communications cable, or a DV-1000CBL

communications cable with a FA-15HD 15-pin HD

DSub/RJ12 Adapter connected to an AutomationDirect

PLC’s 15-pin HD communications port (DL06, D2-250-1 &

D2-260) PLCs. See Chapter 6: PLC Communications in the

Hardware User Manual (EA6-USER-M) for additional

details.

LISTEDLISTED

M177M17

Date code:****Date code:****

5443322

01.R01.

ADE IN CHINAMADE IN CHINA

EA1-S6MLW + serial numberEA1-S6MLW + serial number

MODEL:EA1-S6MLWMODEL:EA1-S6MLW

NPUT:12-24V 6.5WINPUT:12-24V 6.5W

IND.CONT.EQ.IND.CONT.EQ.

Supply to Panel:

1 A @ 12 - 24 VDC

(10.8 - 26.4 VDC)

–

GND

Equipment

Ground

Recommended

DC Supply Fuse

750 mA fast acting,

ADC p/n AGC-75

*NOTE: When the panel is powered through Port1 from a connected PLC or PC, the screen brightness

is diminished because the panel is running in Low-Power Mode. For full brightness, connect an

external 12-24 VDC power source to the panel’s power connection. Low-Power Mode should be

used during initial programming only. Connect an external 12-24 VDC power source when the

panel is installed in its application.

NOTE: Install C-more Micro-Graphic

Programming software before connecting

the panel to the PC to ensure the panel

drivers install correctly.

Following are the minimum system requirements for running C-more Micro-Graphic Programming

Software, EA-MG-PGMSW, on a PC:

• Operating System - Windows® XP Home / Professional Edition Service Pack 2, Windows® 2000 with Service Pack 4,

Windows® Vista (32 or 64 bit), Windows® 7 (32 or 64 bit) or Windows 8 (32 or 64 bit)

• Keyboard and Mouse or compatible pointing device

• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution

(1024 x 768 pixels recommended) 64K color minimum

• 150 MB free hard-disk space

• CD-ROM or DVD drive for installing software from the CD, or internet access to download free programming software

• USB port to use with an EA-MG-PGM-CBL, USB to RS232 Programming Cable Assembly for project transfer from the

programming software to the panel

NOTE: Software and Firmware Version 2.0 or later is required with models EA1-S6ML and

EA1-S6MLW. Available for free download at www.automationdirect.com.

. Information >

2. Setting >

3. Test Menu >

. Exit >

DWN

ENT

SETUP MENU

Total:

1835008 Bytes

sage:

26206 Bytes

ree:

1808802 Bytes

MEMORY

Examples

Choose C-more 6” Micro-Graphic Panel to PLC Protocols

& Cables

NOTE: For the latest list of available

PLC drivers and PLC cables go to

www.automationdirect.com.

Cable Description Cable Part No.

Cables used with serial Port2

AutomationDirect Productivity Series Do-more,

LICK,

DDiirreecctt

OGIC PLC RJ-12 port, DL05, DL06,

L105, DL205, D3-350, D4-450 & H2-WinPLC

(RS-232C)

EA-2CBL

LOGIC (VGA Style) 15-pin port,

DL06, D2-250 (250-1), D2-260

(

RS-232C).

EA-2CBL-1

DDiirreecctt

OGIC PLC RJ-11 port, D3-340

(RS-232C).

EA-3CBL

DDiirreecctt

LOGIC DL405 PLC 15-pin D-sub

port, DL405 (RS-232C).

EA-4CBL-1

DDiirreecctt

LOGIC PLC 25-pin D-sub port,

L405, D3-350, DL305 DCU and all DCM’s

(RS-232C).

EA-4CBL-2

Allen-Bradley MicroLogix 1000, 1100,

1200 & 1500 (RS-232C)

EA-MLOGIX-CBL

Allen-Bradley SLC 5-03/04/05,

ontrolLogix, CompactLogix, FlexLogix

DF1 port (RS-232C)

EA-SLC-232-CBL

Allen-Bradley PLC-5 DF1 port

(RS-232C)

EA-PLC5-232-CBL

Allen-Bradley MicroLogix, SLC 5-01/02/03,

LC5 DH485 port (RS-232C)

EA-DH485-CBL

E 90/30, 90/70, Micro 90, Versamax Micro

(Port2) 15-pin D-sub port

(RS-422A)

EA-90-30-CBL

MITSUBISHI FX Series 25-pin port

(

RS-422A)

EA-MITSU-CBL

ITSUBISHI FX Series 8-pin mini-DIN

(RS-422A)

EA-MITSU-CBL-1

OMRON Host Link (C200 Adapter, C500)

(RS-232C)

EA-OMRON-CBL

Cable Description Cable Part No.

Cables used with serial Port1

AutomationDirect Productivity Series, Do-more,

LICK,

DDiirreecctt

OGIC PLC RJ-12 port, DL05, DL06,

L105, DL205, D3-350, D4-450 & H2-WinPLC

(RS-232C)

DV-1000CBL

Note: The PLC can provide 5 VDC through this cable. No external 12-24

VDC souce is required, however, screen brightness is diminished and

he alarm beep will not function.

LOGIC DL405 PLC 15-pin D-sub

port, DL405

(

RS-232C)

D4-1000CBL

DDiirreecctt

LOGIC (VGA Style) 15-pin port,

L06, D2-250 (250-1), D2-260

(RS-232C)

Use with DV-1000CBL cable.

FA-15HD

DDiirreecctt

LOGIC PLC 15-pin D-sub port,

DL405

(RS-232C).

FA-CABKIT

DDiirreecctt

OGIC PLC RJ-11 port, D3-340

(RS-232C).

OP-3CBL-1

Connect the serial communications cable between the C-more Micro-Graphic panel and the PLC. The

panel can be connected to the PLC via the panel’s built-in RJ12 serial communications port (RS-232) or

15-pin serial communications port with either RS-232, RS-422 or RS-485 communications.

Port 1

DV-1000CBL

serial cable

CLICK PLC

C-more 6 Inch

Micro-Graphic

Panel

*NOTE: When the panel is powered through Port1 from a connected PLC or PC, the screen brightness

is diminished because the panel is running in Low-Power Mode. For full brightness, connect an

external 12-24 VDC power source to the panel’s power connection. Low-Power Mode should be

used during initial programming only. Connect an external 12-24 VDC power source when the

panel is installed in its application.

Tightening Torque

Power supply wire connection 1.7 lb-in (0.2 Nm)

Required Wire Specif ication

Supported temperature Over 60 °C

Wire Material Copper

Wire Size 16 - 22 AWG

LC Drivers

erial - port1 or port2

erial - port2 only

AutomationDirect Productivity3000 Allen-Bradley DF1 Full Duplex

utomationDirect CLICK

llen-Bradley DF1 Half Duplex

AuomationDirect Do-more Allen-Bradley PLC5 DF1

AutomationDirect K-sequence Allen-Bradley DH485

AutomationDirect DirectNET GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)

AutomationDirect Modbus Mitsubishi FX

Modicon Modbus RTU Mitsubishi Q and QnA

Entivity Modbus RTU Omron Host Link (C200 Adapter, C500)

mron FINS Serial (CJ1, CS1)

Siemens PPI (S7-200 CPU)

AutomationDirect SOLO Temperature Controller

AutomationDirect GS Drives

Product Package Label

NOTE:

CC--mmoorree

6” Micro-Graphic panels with hardware version R05 and higher must use firmware

version 3.20 or higher

Product Label

ISTEDLISTED

7M177M17

Date code:****Date code:****

5443322

05.R05.

MADE IN CHINAMADE IN CHINA

EA1-S6MLW + serial numberEA1-S6MLW + serial number

MODEL:EA1-S6MLMODEL:EA1-S6ML

NPUT:12-24V 6.5WINPUT:12-24V 6.5W

IND.CONT.EQ.IND.CONT.EQ.

Hardware Version

UL/CUL/CSA/CE Certification Numbers

Name UL/CUL UL508 CSA CE ISO-9000

CC--mmoorree

Micro-Graphic Panels

& Accessories

E157382 E157382 234884 EN61131-2 Yes

1 2

Shrnutí obsahu

Strany 1 - Additional Help and Support

®3505 HUTCHINSON ROADCUMMING, GA 30040-5860Minimum items required to create a working system:• C-more 6” Micro-Graphic panel• C-more Micro-Graphic Pro

Strany 2 - Specifications

TxDRxDPWRLED Status IndicatorsReplacement PartsUSB to RS232 Programming Cable AssemblyTOP VIEWFRONT VIEWLEFT VIEW0.484[12.3]2.598[66.0]2.539[64.5]1.41

Komentáře k této Příručce

Žádné komentáře

C-more micro EA1-S6MLW Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne C-more micro EA1-S6MLW. C-more micro EA1-S6MLW User manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro ne C-more micro EA1-S6MLW